Arduino Ethernet Shield W5100


Arduino Ethernet Shield W5100
Stock Number: 33318 MP
  Be the first to review this item
$0.00


This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.
This item is no longer available


SHARE
    
     Email this to a friend     

Detailed Description

Stackable Ethernet Shield for UNO & MEGA
Compact LAN Shield using the Wiznet W5100 chip providing IP stack and capable of both TCP & UDP. Shield supplies up to 4 simultanious socket connections. SPI interface for communication to Arduino and or other micro controllers. Can be server or client. Micro SD card slot for file storage.
Note: the W5100 & SD card share the SPI bus, only one can be active. You must disable the one you are not using. Freeware available through www.arduino.cc.en and others. RJ jack mounted Green & Yellow LEDs
Power: 3.3/5VDC from microcontroller
Digital I/O : same as controller
Analog Input: same as controller
LEDs: 7 TX,TX,Coll,FullD,100M, Link & Power
L: 2-3/4" W: 2-1/8" HT: 1-1/16” O/A WT: .06

Ethernet Shield with Micro SD Slot for Arduino
Stackable Internet interface board based on the Wiznet 5100 Chip. Provides a Network (IP Stack) capable of UDP & TCP. Can be used as server or client.
Communicates using the SPI interface (Arduino Pins 10-13)
Supports up to 4 Sockets
Compatible with the Duemilanove (168/328), Uno and Mega (1280/2560)
MAC address: 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED byte mac = 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED
Supported by Arduino Ethernet library.
Supported by Arduino SD library


California Proposition 65 Warning WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
(This item was manufactured prior to August 31st, 2018)



Recently Viewed Items